Thursday, January 17, 2013

Swimming Pool Under water Lights

Underwater Swimming Pool Light PU9

The Certikin underwater light incorporates features absent from other underwater systems. The unique Micallef fittings at the niche and deck box enable the installer to fit non-standard conduit lengths. 15m reels are available – part no. SPC464.
Every light comes complete with a factory fitted clear polycarbonate safety cover (PU15C). Also available in blue, red and green, these can be purchased along with a compatible front plate to suit existing installations (PU15N).
Every light comes with a finishing fascia ring. The liner/shutter version clips onto the clamp plate hiding unsightly screw heads; the concrete version is easily fitted to the niche surround and is designed to cover tiling edges.
The fascia rings are compatible with all Certikin underwater lights manufactured since 1968 and are available as spares for retro-fitting (Concrete – SPC475; Liner SPC476).
Bulb changing is now easier than ever with combination pozidrive / slotted screw heads, locating lugs
and high-tech nickel plated inserts.
The niche is cleverly designed to angle the beam down by 5 degrees which means the lights can be positioned to accomplish the optimum effect in the pool without glare at the poolside.

Certikin Under Water Lights Brochure 

PU9CS 300W 12V for concrete pools
PU9LS 300W 12V for liner pools
PU9CLS 300W 12V ror concrete ‘shutter’ pools

PU9CH 100W 11.5V Halogen for concrete
PU9LH 100W 11.5V Halogen for liner pools
PU9CLH 100W 11.5V Halogen for concrete ‘shutter’ pools
Replacement sealed unit   PU93S/H/ST

Replacement ‘guts’ units with conventional or halogen bulbs PU93S or PU93H. Each pack includes the entire internal unit for the PU9 light, a new PU10N deck box lid, screws and a pull string for easy installation.
PU9HG. For all existing Certikin halogen light installations, the PU9HG unit provides the easiest possible bulb change. Simply unplug the quick release cable at the pool side and plug in the new unit.  PU9ST – Alternative to PU93S gut pack comes complete with stainless steel front plate. Replacement bulb kits PU8 & SPC556HN
The PU8 is the only replacement bulb kit suitable for the conventional 300 watt light, it is supplied complete with accessories essential when changing the bulb – o’ring , terminal screws and emery paper for cleaning the cable terminals.
The MK2 halogen bulb kit (SPC556HN) includes a replacement bulb, a cleaning cloth for polishing
the stainless steel reflector and a replacement o’ring. Deck Box PU10N Deck mounted junction box
for connecting the cables between the u/w light and the transformer. The PU10N has a square frame to make tiling easier and its double o’ring sealing system makes it IP65 – jet proof and water tight. Underwater light connector PU9UC The u/w light ‘quick release connector’ (PU9UC) rated as IP68 – completely submersible – this optional accessory can be fitted to the cable of existing conventional underwater lights. Designed to be wired in minutes it means that future bulb changing can be carried out away from the poolside.

If you require any assistance for your swimming pool under water lights please contact Mike Payne on Tel:0208 577 6669 or email:

No comments:

Post a Comment